CakeFest 2024: The Official CakePHP Conference

ldap_set_option

(PHP 4 >= 4.0.4, PHP 5, PHP 7, PHP 8)

ldap_set_optionУстановить значение данной опции

Описание

ldap_set_option(?LDAP\Connection $ldap, int $option, array|string|int|bool $value): bool

Устанавливает значение указанной опции в value.

Список параметров

ldap

Либо экземпляр LDAP\Connection, возвращаемый функцией ldap_connect() для установки опции для этого соединения, либо null для установки опции глобально.

option

Опция option может быть одной из:

Опция Тип Доступна с
LDAP_OPT_DEREF int  
LDAP_OPT_SIZELIMIT int  
LDAP_OPT_TIMELIMIT int  
LDAP_OPT_NETWORK_TIMEOUT int  
LDAP_OPT_PROTOCOL_VERSION int  
LDAP_OPT_ERROR_NUMBER int  
LDAP_OPT_REFERRALS bool  
LDAP_OPT_RESTART bool  
LDAP_OPT_HOST_NAME string  
LDAP_OPT_ERROR_STRING string  
LDAP_OPT_DIAGNOSTIC_MESSAGE string  
LDAP_OPT_MATCHED_DN string  
LDAP_OPT_SERVER_CONTROLS array  
LDAP_OPT_CLIENT_CONTROLS array  
LDAP_OPT_X_KEEPALIVE_IDLE int PHP 7.1.0
LDAP_OPT_X_KEEPALIVE_PROBES int PHP 7.1.0
LDAP_OPT_X_KEEPALIVE_INTERVAL int PHP 7.1.0
LDAP_OPT_X_TLS_CACERTDIR string PHP 7.1.0
LDAP_OPT_X_TLS_CACERTFILE string PHP 7.1.0
LDAP_OPT_X_TLS_CERTFILE string PHP 7.1.0
LDAP_OPT_X_TLS_CIPHER_SUITE string PHP 7.1.0
LDAP_OPT_X_TLS_CRLCHECK int PHP 7.1.0
LDAP_OPT_X_TLS_CRLFILE string PHP 7.1.0
LDAP_OPT_X_TLS_DHFILE string PHP 7.1.0
LDAP_OPT_X_TLS_KEYFILE string PHP 7.1.0
LDAP_OPT_X_TLS_PROTOCOL_MIN int PHP 7.1.0
LDAP_OPT_X_TLS_RANDOM_FILE string PHP 7.1.0
LDAP_OPT_X_TLS_REQUIRE_CERT int PHP 7.0.5

LDAP_OPT_SERVER_CONTROLS и LDAP_OPT_CLIENT_CONTROLS требуют список элементов управления. Это означает, что значение должно быть массивом элементов управления. Элемент управления состоит из oid, определяющего элемент управления, опционального значения, и дополнительного флага для критичности. В PHP элемент управления задаётся массивом, содержащим элемент с ключом oid и строковым значением, и двумя необязательными элементами. Необязательные элементы являются ключом value со строковым значением и ключом iscritical с логическим значением. iscritical по умолчанию устанавливается в false, если не указан. Для более подробной информации смотрите » draft-ietf-ldapext-ldap-c-api-xx.txt. Смотрите также второй пример, расположенный ниже.

value

Новое значение для указанной option (опции).

Возвращаемые значения

Возвращает true в случае успешного выполнения или false, если возникла ошибка.

Список изменений

Версия Описание
8.1.0 Параметр ldap теперь ожидает экземпляр класса LDAP\Connection; раньше параметр ждал ресурс (resource) ldap link .

Примеры

Пример #1 Устанавливает версию протокола

<?php
// $ds - действительный идентификатор связи с LDAP-сервером
if (ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3)) {
echo
"Используется LDAPv3";
} else {
echo
"Не удалось установить версию протокола в 3";
}
?>

Пример #2 Устанавливает управление сервером

<?php
// $ds - действительный идентификатор связи с LDAP-сервером
// элемент управления с отсутствующим значением
$ctrl1 = array("oid" => "1.2.752.58.10.1", "iscritical" => true);
// iscritical по умолчанию FALSE
$ctrl2 = array("oid" => "1.2.752.58.1.10", "value" => "magic");
// попытка установить оба элемента управления
if (!ldap_set_option($ds, LDAP_OPT_SERVER_CONTROLS, array($ctrl1, $ctrl2))) {
echo
"Не удалось установить серверные элементы управления";
}
?>

Примечания

Замечание:

Эта функция доступна только, когда используется OpenLDAP 2.x.x или Netscape Directory SDK x.x.

Смотрите также

  • ldap_get_option() - Получить текущее значение данной опции

add a note

User Contributed Notes 9 notes

up
8
soulbros at yahoo dot com
22 years ago
As john.hallam@compaq.com above mentioned ,one has to set option LDAP_OPT_PROTOCOL_VERSION=3
ldap_set_option($ds,LDAP_OPT_PROTOCOL_VERSION,3);
to use the ldap_rename function.

However, the ldap_set_option() line has to be written immediately after ldap_connect() and before ldap_bind() statements.

Christos Soulios
up
5
hansfn at gmail dot com
17 years ago
Luckily you can turn on debugging before you open a connection:

ldap_set_option(NULL, LDAP_OPT_DEBUG_LEVEL, 7);

This way you at least can see in the logs if the connection fails...
up
2
php at richardneill dot org
1 year ago
If you want to disable the TLS cert check (e.g. because you are doing an SSH port-forward, and ldaps is pointing to localhost), then you must invoke:

ldap_set_option(NULL, LDAP_OPT_X_TLS_REQUIRE_CERT,0)
*before* calling ldap_connect()

If you try:

$ds = ldap_connect(...)
ldap_set_option($ds, LDAP_OPT_X_TLS_REQUIRE_CERT,0)

then the option won't actually take effect, and the certificate will be checked anyway, and a TLS failure will happen..
up
2
technosophos
17 years ago
The following flags are valid integer values for the LDAP_OPT_DEREF (as taken from the documentation for ldap_read()):

LDAP_DEREF_NEVER (int 0) - (default) aliases are never dereferenced.

LDAP_DEREF_SEARCHING (int 1) - aliases should be dereferenced during the search but not when locating the base object of the search.

LDAP_DEREF_FINDING (int 2) - aliases should be dereferenced when locating the base object but not during the search.

LDAP_DEREF_ALWAYS (int 3) - aliases should be dereferenced always.

Example:
<?php
ldap_set_option
($ds, LDAP_OPT_DEREF, LDAP_DEREF_ALWAYS);
?>

These are defined in the draft C API (presumably from the original LDAP API). See draft-ietf-ldapext-ldap-c-api-xx.txt included in the OpenLDAP source code distribution.
up
0
Maarten at Aerobe
4 years ago
PHP 7.1 added support for configuring the LDAP CA/Cert environment directly, rather than relying on the environment variables. I noticed that a lot of people are having trouble getting this to work.

The correct way is:
$ds=ldap_connect("ldap.google.com");
ldap_set_option(NULL, LDAP_OPT_X_TLS_CERTFILE, "/path/file.crt");
ldap_set_option(NULL, LDAP_OPT_X_TLS_KEYFILE, "/path/file.key");
ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3);
ldap_set_option($ds, LDAP_OPT_REFERRALS, 0);
ldap_start_tls($ds);
...
ldap_close($ds);
up
0
badbo_5834 at hotmail dot com
10 years ago
I have the following code, but you do not rename the cn, that may be?

$TheDN = "cn=Nombre,ou=Addressbook,dc=axia-ldap,dc=net";
$newRDN = "cn=bill";
$newParent = "ou=Addressbook,dc=axia-ldap,dc=net";
ldap_set_option($ds,LDAP_OPT_PROTOCOL_VERSION,3);
$result = ldap_rename($ds, $TheDN, $newRDN, $newParent, TRUE);
up
0
john dot hallam at compaq dot com
22 years ago
To get this to work I had to set the LDAP version to 3 using ldap_set_option. Here is an example that might help:

$TheDN = "cn=john smith,ou=users,dc=acme,dc=com";
$newRDN = "cn=bill brown";
$newParent = "ou=users,dc=acme,dc=com";
ldap_set_option($ds,LDAP_OPT_PROTOCOL_VERSION,3);
@$result = ldap_rename($ds, $TheDN, $newRDN, $newParent, TRUE);
up
-2
minusf at gmail dot com
18 years ago
it seems that ldap_set_option returns 1 for bogus ldap_connect -ions also.
ldap_connect always returns a resource (documented in the
comments of ldap_connect) so it is not possible to check if the
ldap server is there or alive or what. and because ldap_set_option
must be between ldap_connect and ldap_bind, there seems to
be no sense in checking the return value.

it is a bit strange that ldap_bind is the first function which can
really check if a ldap resource is usable because it is the third
function in line to use when working with openldap.

<?php
$connect
= ldap_connect("whatever");
$set = ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);
echo
$set;
?>
To Top